|
Dongguan stainless steel cutter matters should be paid attention to when processing Dongguan stainless steel cutter matters should be paid attention to when processing When milling the stainless steel, should be used as suitable milling processing. Asymmetric along the cutting edge milling method can guarantee smoothly cut off from the metal, chip bonding contact area is lesser, vulnerable to dump under the effect of high speed centrifugal force, so as to avoid blade to cut into the workpiece, chip impact before the knife blade surface spalling and crack phenomenon, improve the durability of cutting tools. Dongguan jin chi nc tool co., LTD By using the spray cooling effect is the most significant, stainless steel cutter durability can be improved more than double; Like with 10% emulsion cooling, should guarantee the cutting fluid flow to achieve sufficient cooling. Stainless steel cutter milling of stainless steel, Vc = 70 ~ 150 m/min, Vf = 37.5 ~ 150 mm/min, at the same time should be depending on the alloy grades and workpiece material make appropriate adjustments. Dongguan jin chi nc tool co., LTD |